Hello. Log-In
My Account
Log-In Access your account, saved carts & personalized items.
Sign-Up Use all of our special member features.
Shopping Cart At Designer Drapery Hardware
Your shopping cart is empty.
$79.50 For 36"
Selected Color: 025 - White
Qty:
Rod
Kirsch Cubicle Track (Hospital, Hotel Or Residential) Direct Ceiling Mount (9045)
Tip-To-Tip Width
36"
025 - White
White
Mounting Location
Ceiling
Drapery Style
Pinch Pleat
Draw Style
Split Draw
Control Style
Hand Control (Baton Or Wand)
Carriers
Kirsch Molded Slide
Masters
Overlap Masters
Brackets
None - Direct Ceiling Mount
Save Rod For Later
Heavy-Duty & Decorative Curtain Rod Selection & Installation Guide

Kirsch Cubicle Track (Hospital, Hotel Or Residential) Direct Ceiling Mount

Color: 025 - White
$79.50 For 36"
Retail: $170.75 Save $91.25 (54%)
Shown In:
Help With This Page
1 Tip-To-Tip Rod Width
Top ↑
 
Help With Width
2 Choose Bending Or Curving Options
Top ↑
This rod can be bent into special shapes for bay windows, corners and curved to fit bow windows.
Select a bend or curve style above to continue.
Help With Bends & Curves
3 Choose A Color Or Finish
Top ↑
025 - White For Kirsch Cubicle Track
White
Color 768
090 - Aluminum For Kirsch Cubicle Track
Aluminum
Color 770
059 - Black For Kirsch Cubicle Track
Black
Color 869
064 - Bronze For Kirsch Cubicle Track
Bronze
Color 892
Close
Choose A Color Or Finish:
025 - White For Kirsch Cubicle Track
White
Color 768
090 - Aluminum For Kirsch Cubicle Track
Aluminum
Color 770
059 - Black For Kirsch Cubicle Track
Black
Color 869
064 - Bronze For Kirsch Cubicle Track
Bronze
Color 892
Enlarge This Section
4 Choose Your Draw Style
Top ↑
Split Draw
Split Draw
One-Way Left (Stack Left)
One-Way Left
One-Way Right (Stack Right)
One-Way Right
Help With Draw
5 Add Batons (Wands) To Your Rod
Top ↑
No Batons
30" 1/4" Fiberglass Baton With Harnes... [+] $11.12
41699
36" 3/8" Clear Acrylic Baton With Ada... [+] $12.98
41700
72" 3/8" Fiberglass Baton With Adapters [+] $30.76
41701
60" 3/8" Fiberglass Baton With Adapters [+] $23.64
41702
48" 3/8" Fiberglass Baton With Adapters [+] $14.52
41703
36" 3/8" Fiberglass Baton With Adapters [+] $14.52
41704
30" 3/8" Fiberglass Baton With Adapters [+] $8.80
41705
6 Choose Your Carriers
Top ↑
Molded Slide
41779
Kirsch Snap Tab [+] $2.79
41780
7 Specify Custom Carrier Quantity
Top ↑
This rod comes standard with 3 carriers per linear foot. This should be just fine for most all situations. But, you can specify the exact number of carriers you need if you want to.
Tip-To-Tip Width: 36", Rod Color: 025 - White, Mount: Ceiling, Drapery Style: Pinch Pleat, Draw Style: Split Draw, Control Style: Hand Control (Baton Or Wand), Carriers: Kirsch Molded Slide, Masters: Overlap Masters, Brackets: None - Direct Ceiling Mount
$79.50 For 36"
Color: 025 - White
Qty:
Save Rod For Later
Heavy-Duty & Decorative Curtain Rod Selection & Installation Guide

Questions About Kirsch Cubicle Track

We will never publish, share or send marketing messages to your eMail Address. We'll only use it to respond to your question.

Thanks for sending us a question! We'll send you an answer by eMail within one business day!
There aren't any Questions & Answers posted yet. Be the first to ask a question about this product!
 

About Kirsch Cubicle Track (Hospital, Hotel Or Residential) Direct Ceiling Mount

Cubicle track is screwed directly into the ceiling and is popular in hotels, resorts and hospitals. Frequently used in homes for sheers behind curtains. Cubicle track is hand or baton draw only, there are no control cords. Consider adding a baton for easy operation. Maximum single piece width is 192 inches. Any track over this size will be spliced with connectors.

 
Close
Kirsch Cubicle Track From Kirsch
Kirsch Cubicle Track
Close
Help With Width
 
Give us your tip-to-tip rod width.

For Decorative Traverse Rods, don't include the width of the finials. Just measure from the point where you want the rod to begin to the point where you want your rod to end.
Close
Help With Mount
 
Wall Mount Rods attach with brackets into your wall or on your trim. Ceiling Mount Rods attach to the ceiling with ceiling mount brackets, or by direct mount depending on your rod style.

For Decorative Traverse Rods, ceiling mount rods can only use End Caps, you won't be able to add a decorative finial to the end of a ceiling mount rod.
Close
Help With Draw
 
Close
Help With Bends & Curves
 
Make sure you enter the wall width for your window. Don't try to figure out the actual rod width. The factory will need to make the necessary deductions to account for your bend radius and your return size.

We're probably going to have to ask you to make a template. It's really easy to do with brown craft paper. Just lay it out on the floor and cut it to size to conform to the shape of your window.
 
Angles can be tricky. One of the easiest ways to find your degree of bend is to use two index cards or business cards. Position them in the corner of your window and tape them together to reproduce the angle. Then, lay them flat on a protractor to determine the degree.

Don't let the process overwhelm you, it's actually a lot easier than it seems. Just take it one measurement at a time and remember that we're going to review what you enter here and if anything looks off, we're going to call you before we start making your rod.
Close
Help With This Page
Yes, we know this page looks scary! There are a lot of options for custom made rods and we want to show you every possible configuration, just in case. But, for about 90% of all custom rods, the only sections you'll need to pay attention to are Width, Mounting Location and Color & Finials (for Decorative Traverse). This page won't let you "mess up" - if you make a selection that won't work with other options, we'll stop you and tell you why.
Set your Width & Mounting Location first. Most options are restricted by rod width and mounting location. So, set those two options first. If you come back to them later, we may have to override some of your other choices. If an option is disabled due to width or mount, we'll tell you why.
We've pre-selected all Standard Options for you. Again, about 90% of time, you'll need a wall mount rod, split draw, cord-right with a 86" cord drop, standard carriers, standard brackets with 3 1/2" to 4 1/2" return. So, we already filled in all of those options for you. You'll just need to glace over them to make sure that's what you need for your curtains and make any necessary changes.
If you don't understand a section, click the "Help" button. Most sections have a "Help" button on the right hand side of the screen. If the explanation isn't clear to you, then ask us!
Let us review your rod for you if you're uncertain. We're always available to take a look at your specifications and make suggestions. You can call us and provide the call-in code (absolute bottom right of this page, look for the head-set icon) and we'll be able to see what you're working on. Or, you can "Save Rod For Later" and email us and we can take a look at what you've saved.
Close
Save Rod For Later
We'll save your progress to your My Account Home Screen and you can continue working on your custom rod later, or you can add it to your Shopping Cart when you're ready to buy.

You need to be logged-in to continue. Log-In now, or Sign-Up and when you're finished we'll bring you back here so you can finish saving your progress.
Log-In
Sign-Up
DDH Pro For Designers
DDH Pro For Designers
Share This Page
Follow Us
Verify Our Security
Designer Drapery Hardware Secuirty
5R87-561036
CFD V6 (7.0.33)
Fetching Results, Wait A Minute